Pro Comp Rear Driveshaft Spacer | 90-4107B

Manufacturer: Pro Comp

Part # 90-4107B

Vehicle Fitment: 1997 – 2020 Ford F150

Vehicle Placement: Rear Driveshaft

Overview
The Explorer Pro Comp # 90-4107B Rear Driveshaft Spacer is designed for use on 2004 – 2015 Ford F150 4×4 trucks equipped with a rear suspension lift that has pulled the rear driveshaft rearward and out of the transfer case. The black and white image shows the assembly of the 90-4107B as it will be installed on the vehicle. Please note that this spacer is 1.188 in. thick. The spacer is ONLY designed for installation on an F150 running a rear suspension lift that has pulled the driveshaft slip yoke too far out of the transfer case.

IMPORTANT! Fully cycle the rear suspension and check for driveshaft plunge. If the driveshaft is too long it will destroy the transfer case. Pro Comp takes NO responsibility for damage caused as a result of the installation of this kit. Please note that improper installation of this item could cause damage to the transfer case if the driveshaft plunge is so great it forces the yoke too far into the case.

Specifications:
Outside Diameter: 5.2 in. or 132 mm
Bolt Circle Diameter: 4.25 in. or 108 mm
Bolt Pattern: 3 in. x 3 in. Square
Thickness: 1.188 in. or 30 mm
Pilot Diameter: 1.5 in. or 38 mm