SpeedStrap 2In Big Daddy Weaveable Recovery Strap – 30Ft

The Big Daddy 2 Weavable Recovery Tow Strap

The Big Daddy 2 Weavable Recovery Tow Strap is a metal-free tow strap with a unique design that is rated at 14,000 lbs breaking strength. Simply create a loop at both ends and weave it back through itself. Just wrap, weave, and pull! When youre done, unweave it and store it for next time.

Unique Construction

The unique construction is what gives the Big Daddy Weavable Recovery Tow Strap its strength. Rather than being sewn together, all the fibers are actually interwoven for the length of the tow strap. The 50 Big Daddy Weavable Recovery Strap is rated to pull up to 14,000 lbs, while still being small enough size to fit under the seat or in a small storage compartment. The weavable design means you can wrap it around almost anything No need to use metal shackles or knots that you cant undo.

Available Lengths

The Big Daddy 2 Weavable Recovery Tow Strap is available in 20, 30, or 50 lengths, and is most commonly used for Jeeps, Trucks, and Buggies!

How Does It Work?

Wrap One end of the strap around an axle, through a shackle, or around any solid tow point.

Weave The end of the strap back through the interwoven loops that run throughout the length of the strap. You can also adjust the length of the strap this way if you want to make it shorter! We recommend at least 4-6 weaves when pulling a vehicle. The more weaves you make, the better the pull strength!

Pull! Give the strap a good tug to set the weave. The strap uses the friction of the weave to create a non-slip grip. When recovering a vehicle, make sure to pull up all the slack before you start, then hit the gas and watch as this recovery strap goes to work!

When youre done, simply unweave the strap at both ends and stow your Weavable Recovery Strap for next time!

SpeedStrap Warranty

For information on SpeedStrap warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.